AIPTEK PenCam 2 User Manual download pdf (Page 3)

Self Timer

Pressing the mode button until "St" appears in the

LCD then pressing the shutter button will start a 10

second self-timer. The camera will issue a short

beep every second and then a longer beep. The

next beep indicates that the picture has been taken.

Note: The self-timer can not be selected when the

camera is full.

Switch mode to "St"

"St" will be displayed

Press SW1 to initiate

the self-timer mode

Switch mode to "Ct"

"Ct" will be displayed

Press SW1 to utilize

Continuous mode

Pictures may be taken continuously as long as the

shutter button is pressed(and the camera is not full)

as follows:

Press the mode button until the Ct appears in the

LCD. Pressing the shutter button within 5 seconds

will cause the camera to start taking pictures for as

long as the shutter button is held down. If the

shutter button is not pressed within 5 seconds the

camera will revert back to normal picture taking.

Note: During the continuous mode the camera will

allow pictures to be taken with incorrect exposure.

Clearing the stored images

Press the mode button until CL appears on the LCD.

Pressing the shutter button once will cause the

camera to beep and the CL will start flashing .

Pressing the shutter button again within 5 seconds

will clear the camera and reset the picture counter.

Changing the picture resolution

Picture resolution may only be changed when the

camera memory is empty. If any pictures have

been taken then the memory must first be cleared.

To change resolution press the mode switch until

the resolution option is displayed, either Hr to

change to high resolution mode (if you are currently

in the low resolution mode)or Lr to change to low

resolution(if you are currently in the high resolution

mode). The camera will beep and the display will

reset to indicate the number of pictures available.

Switch mode to "CL"

"CL" will be displayed

Press SW1 to

select clear mode

LCD will start flashing

Click SW1 twice to clear

the memory

Switch mode to "Hr" or "Lr"

"Hr" or "Lr" will be displayed

Press SW1 to change resolution

SW1

@n IP Company

ENGLISH

1 2 3 4 5 6 7 8 ... 41 42

Comments to this Manuals

No comments

AIPTEK PenCam 2 User Manual Page 3

Comments to this Manuals

Related products and manuals for Camcorders AIPTEK PenCam 2